Aluminum sheet
Aluminum sheet, also known as aluminum sheet, is the result of the basic raw material aluminum after high pressure pressing and rolling into a panel form. The aluminum sheet is characterized by being very thin and lightweight, but strong enough to provide extremely high versatility and has the inherent properties of being easy to install and maintain. It also has many other unique and practical properties that make it widely used in various fields of industry, agriculture, and manufacturing/production applications.
Feature
- Lightweight. The aluminum sheet weighs about 1/3 of the steel sheet and is one of the lightest metal sheets on the market.
- Corrosion Resistance. Aluminum is a material that does not corrode easily. Because some alloys are more resistant to corrosion than others, special erosive forces are needed to cause corrosion of aluminum plates.
- Strength. Although the aluminum sheet is very light, it is also very strong.
- Form-ability. The melting point of aluminum sheet powder is relatively low. Therefore, when it is subjected to a certain amount of heat, it can easily form various shapes.
- Reflectivity. Because of its reflectivity, this means that it reflects light and heat away from its surface.
Application
- Lighting
- Solar reflector
- Architectural appearance
- Interior decoration
- Ceiling
- Furniture
- Cabinets
- Elevator
- Signs
- Nameplates
- Car interior and exterior decoration
- Household appliances
- Refrigerator
- Microwave oven
- Audio equipment
- Aerospaceand etc.
Chemical Component
Aluminum Al: Surplus
Silicon Si: 0.25
Copper Cu: 0.10
Magnesium Mg: 2.2 ~ 2.8
Zinc Zn: 0.10
Manganese Mn: 0.10
Chromium Cr: 0.15 ~ 0.35
Iron: 0.4 0.
Tensile strength (σb) : 170 ~ 305MPa
Conditional yield strength σ0.2 (MPa)≥65
Elastic modulus (E) : 69.3 ~ 70.7Gpa
Annealing temperature: 345℃.
Aluminum Sheet Price
Compared with other metals, aluminum alloy has a high cost performance. For many companies looking for lightweight, strong and flexible metals, aluminum sheet metal is the ideal choice. Due to its properties, aluminum metal is also becoming more and more common in our daily life.
6061 Aluminum sheet
6061 T6 is a very versatile aluminum sheet product with a wide range of applications. Aluminum sheets are made of one of the most widely used heat-treatable aluminum alloys. The sheet has excellent corrosion resistance and good work-ability. 6061 sheets are used in a wide range of applications, from medical components to aircraft structures to structural components.
Aluminum Plate Maintenance
The specific cleaning steps of the aluminum plate are as follows:
- Wash the surface of the board with a lot of water;
- Gently wipe the surface of the test board with a soft cloth soaked with detergent diluted with water;
- Then wash the board with a lot of water, wash away the dirt;
- Check the surface of the board, for the place that is not cleaned with detergent;
- Rinse the board with clean water until the detergent is washed away.
Note: Do not clean the hot surface (temperature over 40 °C), because the moisture volatilization is harmful to the surface paint!
In particular, please choose the appropriate detergent, a basic principle is: be sure to choose neutral detergent! Do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acid detergents, abrasive detergents and paint dissolving detergents.
